Use to remove split collets when compressing valve springs on four stroke engines. Holds valve spring collets in position for replacement. Universal on most four stroke engines.
Motorcycle Repair Tool Kit (Items Available Separately):
| Item No. | Description |
|---|---|
| CR001 | Crank Case Installer (10x1.25, 12x1.25mm Nuts) |
| CR002 | Drive Chain Breaker (3-22mm) Pin Dia. 3.5-6mm |
| CR003 | Universal Flywheel / Clutch Holding Tool |
| CR004 | Magneto Flywheel Puller 28 x 1.0mm (R-Hand) |
| CR005 | Magneto Flywheel Puller 27 x 1.0mm (L-Hand) |
| CR006 | Magneto Flywheel Puller 24 x 1.0mm (R-Hand) |
| CR007 | Magneto Flywheel Puller 16 x 1.5mm (R-Hand) |
| CR008 | Magneto Flywheel Puller 14 x 1.5mm (R-Hand) |
| CR009 | Speedometer Front Wheel Gear Nut Socket |
| CR010 | 3 Piece Tappet Adjusting Tool (8 & 9mm) |
| CR011 | Clutch Nut Socket (22mm dia. 4 Pins) |
| CR012 | Clutch Nut Socket (23mm dia. 4 Pins) |
| CR013 | Valve Spring Collet Remover/Replacer |
| Item No. | Description |
|---|---|
| CR014 | D/Ended Steering Lug Nut Hook Wrench |
| CR015 | Screwdriver with 1/4"Hex Bit Holder |
| CR016 | "T"-Handle with 1/4"Hex Bit Holder |
| CR017 | 10mm x 1/4"Hex x 100mm Deep Socket |
| CR018 | 8mm x 1/4"Hex x 100mm Deep Socket |
| CR019 | 1/2"Sq. Drive x 1/4"Hex Bit Holder |
| CR020 | #2Phillips x 6mm Slotted x100mm 1/4"Hex Bit |
| CR021 | #3Phillips D/End x 100mm 1/4"Hex Bit |
| CR022 | 5mm, 6mm Hex D/End x 100mm 1/4"Hex Bit |
| CR023 | 4mm, 5mm Hex D/End x 200mm 1/4"Hex Bit |
| CR024 | #2Phillips D/End x 200mm 1/4"Hex Bit |
| CR025 | #3Phillips D/End x 300mm 1/4"Hex Bit |