- 1. Carefully locate drill and guide bushing and engage ground HSS drill bit. For sizes of 7mm and up, pre-drill.
- 2. Drive in the extractor pin (no deformation of drilled part).
- 3. Put on the extractor nut and unscrew using a wrench.
- 4. Use special guide bushes when drilling sunken or protruding broken screws.
Extracts Broken Screws, Studs and Bolts: 5mm to 16mm Threads
Designed to remove broken fasteners without breaking or jamming. Will turn broken fasteners out while permitting the highest torque without expansion. Made from C4150 alloy steel. Supplied in tough PVC case.
Instructions For Use:
Chart For Using Screw Extractors
For screws that are really seized up first spray with a solvent or heat up. Extractor pins are manufactured from high grade materials and should be kept straight and not heated.
| Bolt Size | Pre-Drill Size (mm) | Drill Size (mm) | Extractor Pin Size | Nut Size | Hex Size (mm) |
|---|---|---|---|---|---|
| M5 | - | 3.2 | Size 1 | Size 1 | Wr. 10 |
| M6 | - | 3.2 | Size 1 | Size 1 | Wr. 10 |
| M7 | 3.2 | 4.8 | Size 2 | Size 2 | Wr. 11 |
| M8 | 3.2 | 4.8 | Size 2 | Size 2 | Wr. 11 |
| M9 | 4.8 | 6.4 | Size 3 | Size 3 | Wr. 13 |
| M10 | 4.8 | 6.4 | Size 3 | Size 3 | Wr. 13 |
| M12 | 4.8 | 8.0 | Size 4 | Size 4 | Wr. 14 |
| M14 | 6.4 | 8.7 | Size 5 | Size 5 | Wr. 17 |
| M16 | 6.4 | 8.7 | Size 5 | Size 5 | Wr. 17 |
Replacement Parts For Screw Extractor Set
| Item No. | Description |
|---|---|
| 8965-A | 3.2mm (1/8") HSS Drill |
| 8965-B | 4.8mm (3/16") HSS Drill |
| 8965-C | 6.4mm (1/4") HSS Drill |
| 8965-D | 8.0mm (5/16") HSS Drill |
| 8965-E | 8.7mm (11/32") HSS Drill |
| 8965-F | #1 Drilling Guide |
| 8965-G | #2 Drilling Guide |
| 8965-H | #3 Drilling Guide |
| 8965-I | #4 Drilling Guide |
| 8965-J | #5 Drilling Guide |
| 8965-K | #6 Drilling Guide |
| 8965-L | #7 Drilling Guide |
| 8965-M | #8 Drilling Guide |
| Item No. | Description |
|---|---|
| 8965-N | #9 Drilling Guide |
| 8965-O | #10 Drilling Guide |
| 8965-P | #1 Extractor Nut |
| 8965-Q | #2 Extractor Nut |
| 8965-R | #3 Extractor Nut |
| 8965-S | #4 Extractor Nut |
| 8965-T | #5 Extractor Nut |
| 8965-U | #1 Extractor Nut |
| 8965-V | #2 Extractor Nut |
| 8965-W | #3 Extractor Nut |
| 8965-X | #4 Extractor Nut |
| 8965-Y | #5 Extractor Nut |
| 8965-Z | Blow Mold Case |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.