Available in 180 Grit Medium & 240 Grit Fine Use with light grade oil only. Hone and remove glaze from cylinders with flexible stone type abrasive ball ends. Ball ends create a perfect cross hatch pattern to enable piston rings to bed correctly against cylinder walls. Available in sizes listed in table.
Brush Lengths: 3" (76mm).
Cylinder Brush Ball Hones (Medium Grit):
| Item No. | Grit | Size (inches) | Size (mm) |
|---|---|---|---|
| FBH092-1 | 180 | 1.1/4" to 1" | 32 to 25mm |
| FBH094-1 | 180 | 1.1/2" to 1.1/4" | 38 to 32mm |
| FBH096-1 | 180 | 1.3/4" to 1.1/2" | 44 to 38mm |
| FBH098-1 | 180 | 2" to 1.3/4" | 50 to 44mm |
| FBH100-1 | 180 | 2.1/4" to 2" | 57 to 50mm |
| FBH101-1 | 180 | 2.1/2" to 2.1/4" | 64 to 57mm |
| FBH102-1 | 180 | 2.3/4" to 2.1/2" | 70 to 64mm |
| FBH103-1 | 180 | 3" to 2.3/4" | 76 to 70mm |
| FBH104-1 | 180 | 3.1/4" to 3" | 83 to 76mm |
| FBH105-1 | 180 | 3.1/2" to 3.1/4" | 89 to 83mm |
| FBH106-1 | 180 | 3.3/4" to 3.1/2" | 95 to 89mm |
| FBH107-1 | 180 | 4" to 3.3/4" | 102 to 95mm |
| FBH108-1 | 180 | 4.1/4" to 4" | 108 to 102mm |
| FBH109-1 | 180 | 4.1/2" to 4.1/4" | 114 to 108mm |
| FBH110-1 | 180 | 5" to 4.1/2" | 127 to 114mm |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.